Is the purpose of the mixed layer
on the surface of powder coated adhesive, destroy the reunion, the binder and
the powder particles uniformly distributed in the whole feeding, mixing is the
first step of the MIM process and important working procedure, because the
defects in feeding cannot eliminate by the adjustment of the steps behind, so
the quality of the feed is key.For mixing the powder and binder content in all
parts of the feeding uniform, at the same time can reduce the time needed for
mixing feeding, maximize the powder in the binder content, avoid the binder and
the powder of two phase separation, the phenomenon such as powder segregation
in the binder, need according to the nature of the material selection of
different mixing equipment and make reasonable mixing process.
Original article link：http://www.zcmim.com/article/mixing-equipment_1.html
没有评论:
发表评论