Mixture
in metal injection molding: raw materials for MIM mainly are mixture of fine
metal powder, thermoplastic, wax binder in accordance with precise ratio. The
mixing process is carried out in a special mixing device. The binders will melt
after heating to a certain temperature. In most cases, mixing process is
carried out by machine. Until the metal powder is coated with a binder uniformly
then cool down to form granular, those granular then can be injected into mold
cavity.
Original article link:http://www.zcmim.com/article/metal-injection-molding-mimimt_1.html
没有评论:
发表评论