How to located sprue gate when design mould before metal injectionmolding process? There are some suggestions for your reference.
(1) Choose nearest obstacle
(2) Gate size and location should avoid injection and peristalsis.
(3) Gate should be located in the thickest part of
injection part section
(4) Gate
location should make flow process shorter and less change of flow direction
(5) Gate location should be helpful for discharging inside cavity gas
(6) Gate location should reduce or avoid weld mark
so as to increase weld fastness.
(7) Gate
location should be selected to prevent material from extrusion deformation by
cavity, core and insert
Original article link:http://www.zcmim.com/article/metal-injection-molding-sgl_1.html
没有评论:
发表评论