Definition: main channel refers to the
part from interface between injection machine nozzle
and mould, to the end of sub-runner.
2. Mould design notice before metal injectionmolding process
(1) Head face for main channel is usually round
shape.
(2)
In
general, the main Channel will design some inclination for ease to release from
mold . But when the main channel across a number of boards at the same time, it
is important to note that each pieces inclination size and hole size.
(3) main
channel size is subject to the flexibility of materials
(4) the main channel mostly use conical. Note
follows when you make mould:
A. the small end diameter D2 = D1, D2 + (0.5 ~ 1 mm)
B. the small end radius R2 = R1 + R2 (1 ~ 2 mm)
(D1, R1 refer to the diameter and radius of injection machine nozzle )
A. the small end diameter D2 = D1, D2 + (0.5 ~ 1 mm)
B. the small end radius R2 = R1 + R2 (1 ~ 2 mm)
(D1, R1 refer to the diameter and radius of injection machine nozzle )
Original article link:http://www.zcmim.com/article/metal-injection-molding-process-mmcimi_1.html
没有评论:
发表评论