2016年6月22日星期三

Injection molding operation method


Because the composition of raw materials processing is not the same, so it may be in the operation to be fine tuning. However, a general set of procedures down the main raw materials, heating, plastic injection molding, mold cooling, the final release, and so on.www.zcmim.com

Injection molding is mainly as long as the processing of a certain shape of the finished product, then it is to match with a lot of mold. The pressure drop of the machine has been melted by the flow of plastic injection into the mold, and finally after cooling to produce finished products. His main work principle is the solid plastic after heating melt can flow, and through a certain pressure into the machine mold, mold and then passes through a cooling, and finally demoulding can get the inner cavity of the mold and the same product.

Injection molding can be applicable to all the plastic products, work efficiency is very high, because the general program as long as a few minutes to complete and quality of the finished product can also from the light of a few grams of the heaviest to tens of kilograms, can complete shape is very complex and type size is very accurate, can be added with metal inserts of the finished product.


Because the injection molding operation is very simple, and the output of the finished product is also very precise size. So now is very popular with everyone.

没有评论:

发表评论