MIM (metal injection molding) mold design
is not a simple task, tolerance and strict, need to pay special attention to
the details of the complex, all this is like climbing to the peak of an
iceberg, very difficult.
High precision, super high tolerance
without flash, surface quality, all of these standards are some requirements
must meet the manufacturing process of metal parts die casting die. There is no
doubt that the metal mold manufacturers to reach this level although there are
a few, but very few, however, for this industry companies, is
"profitable".
First of all, the mold design should have a
good plan. Shenzhen ZCMIM company's engineers had pointed out, "because it
is the foundation and the key to success. It should include excellent cooling
water circuit layout and parting line lock locking device, to prevent the
dislocation of production and processing of mould, a deputy to good support of
mould cavity and core sidewall mold frame, a suitable for specific parts
demoulding method. "
The basic structure and the injection mold
MIM mold is similar, only a few exceptions. Including steel mould cavity and
core, close the angle with the selection of member and the slider, materials
with good liquidity of the runner system design, gate location, ventilation
depth, molding shaping region of the surface quality and its applications in
coating mould cavity and core details correct choice. " Our company
engineer told Xiao Bian, and detailed these views. Because of the many mold
manufacturers according to the general design began to manufacture the mold, so
when the mold manufacturing, machinery and tooling division they give workers
many degrees of freedom design details. But this method of MIM mold
manufacturing is invalid.
MIM molding mold manufacturers and workers
not to observe a mold layout, their main task is to study and observe a set of
detailed drawings. They spend more time in front of mold design details, so the
successful operation of the mold to obtain the spent less time. The details of
the design, including the selection of die materials and mould cavity
tolerances, surface quality and coating, gate and runner size, vent position
and size, position of pressure sensor. After the successful production of MIM
mould, demoulding and cooling has become a key problem.
没有评论:
发表评论